Chevrolet Sonic Owner's Manual: Liftgate (Hatchback)
Warning
Exhaust gases can enter the vehicle if it is driven with the liftgate, hatch/trunk open, or with any objects that pass through the seal between the body and the hatch/trunk or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death.
If the vehicle must be driven with the liftgate or hatch/trunk open:
- . Close all of the windows.
- . Fully open the air outlets on or under the instrument panel.
- . Adjust the climate control system to a setting that brings in only outside air and set the fan speed to the highest setting. See “Climate Control Systems” in the Index.
- . If the vehicle is equipped with a power liftgate, disable the power liftgate function.
For more information about carbon monoxide, see Engine Exhaust.
To lock or unlock the liftgate from the inside, press
or
on the central locking switch or on
the driver door.
The vehicle must be in P (Park) for automatic transmissions. For manual transmissions the parking brake must be engaged.
To open the liftgate from the outside, press
on the RKE transmitter to unlock all
doors, then use the touch pad.
See Remote Keyless Entry (RKE) System Operation.
When closing the liftgate, close from the center to ensure that it fully latches.
Emergency Trunk Release Handle
Caution
Do not use the emergency trunk release handle as a tie-down or anchor point
when securing items in the trunk as it could damage the handle.
There is a glow-in-the-dark emergency trunk re ...
Vehicle Security
This vehicle has theft-deterrent features; however, they do not make the vehicle
impossible to steal. ...
Other materials:
Drive Range, First Gear Engine Braking (Gen 2)
Note: Some models of the 6T30/40/45/50 automatic transmission are equipped with
an electric auxiliary fluid pump for use in hybrid vehicles (BAS+). Hybrid vehicles
do not require internal combustion engine (ICE) operation at all times. After a
successful engine start, the hybrid powertrain con ...
Intake Manifold Installation
Clean the sealing surfaces.
Install the intake manifold (1) along with a NEW intake manifold gasket.
Caution: Refer to Fastener Caution.
Install the 6 intake manifold bolts (1) and tighten to 20 Y (15 lb ft).
...
Synchronizers Cleaning and Inspection
Note: When servicing the synchronizers, retain them in the order
that they are removed. Mark the parts to ensure the correct position for
inspection and assembly.
Clean all the synchronizer parts in a suitable cleaning
solvent and air dry all the parts.
Inspect the 1 ...
0.0105