|
Callout |
Component Name |
|---|---|
|
1 |
Liftgate Weatherstrip Procedure
Clean the area where the seal will be mounted. Use a suitable solvent with a mixture of 50?€‰percent isopropyl alcohol and 50?€‰percent water by volume, or high-flash naphtha. |
Liftgate Trim Finish Panel Replacement (Hatchback)
Liftgate Window ReplacementBackup Lamp Switch Replacement
Removal Procedure
Disconnect the electrical connector from the backup lamp switch?€‰(1).
Remove the backup lamp switch?€‰(1) from the transmission.
Remove and DISCARD the backup lamp switch washer from the backup lamp
switch.
Installation Proc ...
Front Fender Replacement
Front Fender Replacement
Callout
Component Name
Preliminary Procedures
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
Remove the headlamp. Refer to Headlamp Replacement.
Remove the front whe ...
Inflatable Restraint Remote Impact Sensor Replacement
Inflatable Restraint Remote Impact Sensor Replacement
Callout
Component Name
Warning: When performing service on or near the SIR components
or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling
a ...