Chevrolet Sonic Repair Manual: Load Compartment (Hatchback)
The load compartment cover can be used to conceal objects under it or removed and placed on the bottom of the load compartment to carry larger loads.
To remove the load compartment cover:
- Lift up on the load compartment cover and pull out.
- Store the load compartment cover on the bottom of the load compartment.
To install the load compartment cover:
- Align the front sides of the load compartment cover into the slots on both sides at the front of the load compartment.
- Lower the load compartment cover onto the lip around the load compartment.
Instrument Panel Storage
Lift up on the lever to open.
If equipped, the storage area has an auxiliary input jack and USB port inside. ...
SIR Inflator Module Handling and Storage Warning
Warning: When carrying an undeployed inflator module:
Do not carry the inflator module by the wires or connector.
Make sure the air bag opening points away from you.
When storing an u ...
Other materials:
Special Tools
Illustration
Tool Number/Description
CH 21177
J 21177-A
Drum to Brake Shoe Clearance Gauge
CH 41013
J 41013
Rotor Resurfacing Kit
C ...
Engine Front Cover with Oil Pump Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Set the engine to TDC. Refer to Camshaft Timing Chain Inspection.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove ...
Drive Belt Tensioner Installation
Install the drive belt tensioner (1).
Install the upper drive belt tensioner bolt (2).
Install the lower drive belt tensioner bolt (3).
Caution: Refer to Fastener Caution.
Tighten the lower drive belt tensioner bolt (M8) to 22 Y (16&# ...
0.0093