Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Low and Reverse and 1-2-3-4 Clutch Housing Cleaning and Inspection

Chevrolet Sonic Repair Manual / Powertrain / Transmission/Transaxle / Transmission Oil Cooler / Transmission Unit / Low and Reverse and 1-2-3-4 Clutch Housing Cleaning and Inspection



Low and Reverse and 1-2-3-4 Clutch Housing Cleaning and Inspection

Callout

Component Name

Caution:

After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure.

Caution:

Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component.

Preliminary Procedures

  1. Thoroughly clean the housing with clean solvent.
  2. Inspect the piston bores and retainer ring grooves for wear, damage or porosity.

1

1??? Clutch Spring Retainer Groove

2

1??? Clutch Piston Bore

3

Low and Reverse Clutch Spring Retainer Groove

4

Low and Reverse Clutch Piston Bore

5

Clutch Oil Passages

6

Air Bleed Passages

Low and Reverse and 1-2-3-4 Clutch Housing Assemble (6T40/45/50)
Table 1: 1??? Clutch Piston Installation Table 2: Low and Reverse Clutch Piston Installation 1??? Clutch Piston Installation 1??? Clutch Piston Installa ...

Low and Reverse and 1-2-3-4 Clutch Housing Disassemble
Table 1: Low and Reverse Clutch Piston Removal Table 2: 1??? Clutch Piston Removal Low and Reverse Clutch Piston Removal Low and Reverse Clutch Piston R ...

Other materials:

Heater Inlet Hose Replacement (LDE, LUW)
Special Tools BO-38185 Hose Clamp Pliers For equivalent regional tools, refer to Special Tools. Removal Procedure Drain the cooling system. Refer to Cooling System Draining and Filling. Disengage the heater inlet hose quick connect clip (1) at the heater ...

Battery Positive and Negative Cable Replacement
Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the fuse block and battery positive cable cover. Remove the battery tray. Refer to Battery Tray Replacement. Remove the battery posit ...

Range Selector Lever Cable Bracket Replacement
Removal Procedure Set the park brake and chock the wheels. Disconnect the range selector cable end (1) from the range selector lever. Disconnect the range selector cable (2) from the range selector cable bracket. Remove the transmission rang ...

В© 2014-2025 Copyright www.csmans.com
 
0.0065