Chevrolet Sonic Repair Manual: Manual Shift Shaft Seal Installation

Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

Table 1: Manual Shaft Detent (w/Shift Position Switch) Lever Assembly Removal Table 2: Park Pawl Actuator Guide Removal Manual Shaft Detent (w/Shift Position Sw ...

Manual Shift Shaft Seal Removal

Manual Shift Shaft Seal Removal Callout Component Name 1 Manual Shift Shaft Seal Note: Use the DT-45201 seal rem ...

Other materials:

General Description
The factory installed tires are designed to operate satisfactorily with loads up to and including the full rated load capacity when these tires are inflated to the recommended pressures. The following factors have an important influence on tire life: Correct tire pressures Correct wheel ...

Turbocharger Oil Feed Pipe Replacement
Removal Procedure Open the hood. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement. Remove the turbocharger oil feed p ...

Engine Front Cover and Oil Pump Disassemble
Engine Front Cover Disassemble Remove the intake camshaft position sensor bolt (1). Remove the intake camshaft position sensor (2) and the seal ring (3). Remove the exhaust camshaft position sensor bolt (6). Remove the exhaust camshaft posi ...