This allows the startup volume of the infotainment system to be set.
Press < or > to select the desired volume between 9-21.
Touch Beep Volume
System VersionSelecting the Alert Timing
The Collision Alert control is on the steering wheel. Press COLLISION ALERT to
set the alert timing to far, medium, near or off. The first button press shows the
current control setting on the DIC. Additional button presses will change this setting.
The chosen setting will remain until it is ...
Heated Seat Control Module Programming and Setup
The seat heating control module must be programmed with the proper calibration
software. The module stores and utilizes this information however if it is not properly
configured with the correct calibration software, the seat heating control module
will not control all of the vehicle features ...
Cooling Fan Description and Operation (LWE, LUW)
System Overview
The engine cooling fan system is composed of one cooling fan, 2 relays, the engine
control module (ECM), and the associated wiring. The cooling fan assembly includes
1 resistor mounted in the cooling fan shroud. The cooling fan resistor may be a
stand alone compon ...