Windshield Side Garnish Molding Replacement
Mirror AdjustmentHow to Identify Plastic Parts
saepvcsae
Plastic parts can be identified by the SAE code, which is usually found on the
rear of the part, and/or by the characteristics of the plastic. Knowing the type
of plastic aids in selecting the proper repair materials and in selecting the proper
repair procedure.
Look for the SAE ...
SIR Service Precautions
General Service Instructions
Warning: When performing service on or near the SIR components
or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling
and Enabling . Failure to observe the correct procedure could cause deployment
of the SIR components, person ...
Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution.
Caution: Always connect or disconnect the wiring harness connector
from the EBCM/EBTCM with the ignition switch ...