|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the control valve body. Refer to Control Valve Body Replacement. |
|
|
1 |
Output Speed Sensor Bolt M6 x 18 Caution: Refer to Fastener Caution.
9 Y (80 lb in) |
|
2 |
Output Speed Sensor Procedure
Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn. |
Input and Output Speed Sensor Removal
Rear Wheel Speed Sensor ReplacementWhen the System Does Not Seem to Work Properly
The RVC system may not work properly or display a clear image if:
The RVC is turned off. See “Turning the Rear Camera System On or Off” earlier
in this section.
It is dark.
The sun or the beam of headlamps are shining directly into the camera lens.
Ice, snow, mud, or anything else b ...
Removing the Flat Tire and Installing the Spare Tire
1. Do a safety check before proceeding. See If a Tire Goes Flat.
2. Remove the wheel cover, if the vehicle has one, to reach the wheel bolts.
3. Turn the wheel nuts counterclockwise to loosen them. Do not remove them yet.
4. Place the jack at the position marked with a half circle.
5. In ...
Main Shaft Disassemble (Gen 2)
Special Tools
69604356 Gear Pullers
For equivalent regional tools, refer to Special Tools.
Remove the 1st gear thrust washer (1) and the 1st gear (2)
using 69604356 pullersand a hydraulic press.
ii
Remove the following components:
1st gear bearing asse ...