|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Outside Rearview Mirror Fastener (Qty:?€‰3) Caution: Refer to Fastener Caution. Procedure
Disconnect the electrical connector. Tighten
10?€‰Y (89?€‰lb?€‰in) |
|
2 |
Outside Rearview Mirror Procedure
Inspect the outside mirror for proper operation before installing the door trim panel. |
Outside Rearview Mirror Replacement (Manual)
RestraintsImmobilizer System Component Programming
This procedure will learn the immobilizer function. If the battery voltage is
low, charge the battery before proceeding with the learn. If the body control module
(BCM) or engine control module (ECM) have been replaced, they must be programmed
before performing this learn procedure.
Dependin ...
Throttle Body Assembly Installation
Install a NEW throttle body seal.
Install the throttle body (1).
Caution: Refer to Fastener Caution.
Install the 4 throttle body bolts (2) and tighten to 8 Y (71 lb in).
...
Turbocharger Cleaning and Inspection
Cleaning Procedure
Clean all sealing surfaces.
Clean all threads if necessary.
Inspection Procedure
Inspect the wastegate regulator mechanism (1) for functionality.
Inspect the turbine blades for damage or foreign material.
Inspect the t ...