Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: P-Metric Sized Tires Description

Chevrolet Sonic Repair Manual / Chassis / Wheels/Tires / Tires / P-Metric Sized Tires Description


Replacement tires should be of the same tire performance criteria (TPC) specification245/50r16953typeloadindep-passengerttemporarylt-lighttruckspeedsymbolsectionwidth(millimeters)235245275construction(sectionwidth)ddagonal(bas)40sectionwidthsectionheight

Replacement tires should be of the same tire performance criteria (TPC) specification number. This will ensure the same size, the same load range, and the same construction as those originally installed on the vehicle.

Metric Wheel Nuts and Bolts Description
Metric wheel/nuts and bolts are identified in the following way: The wheel/nut has the word Metric stamped on the face. The letter M is stamped on the end of the wheel bolt. The thread sizes ...

Replacement Wheels Description
Replace the wheel if any of the following conditions exist: The wheel exhibits excessive runout. The wheel is bent. The wheel is cracked. The wheel is severely rusted. The wheel is severe ...

Other materials:

Buying New Tires
GM has developed and matched specific tires for the vehicle. The original equipment tires installed were designed to meet General Motors Tire Performance Criteria Specification (TPC Spec) system rating. When replacement tires are needed, GM strongly recommends buying tires with the same TPC Sp ...

Speaker Replacement Reference
Speaker Replacement Reference Component Repair Instruction Front Door Speaker Radio Front Side Door Speaker Replacement Front Tweeter Speaker Radio Windshield Side Garnish Molding Speaker ...

Automatic Transmission Flex Plate Installation
Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Clean the automatic transmission flex plate bolt threads. Install the automatic transmission flex plate (2) and the EN-652 holder to hold the automatic trans ...

В© 2014-2026 Copyright www.csmans.com
 
0.0061