Evaporative Emission Canister Vent Solenoid Valve Replacement
Crankcase Ventilation System Inspection/DiagnosisSunroof Motor/Actuator Initialization/Teach Process
Note: If the sunroof motor is new, cycle the sunroof seven?€‰(7) times
to teach the motor/actuator initialization process.
Perform the initialization/teach procedure on a reinstall motor or a new
motor. Ensure the electrical harness on the headliner is connected to the sunroof
mot ...
Heated Seat Control Module Programming and Setup
The seat heating control module must be programmed with the proper calibration
software. The module stores and utilizes this information however if it is not properly
configured with the correct calibration software, the seat heating control module
will not control all of the vehicle features ...
Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...