Bluetooth Audio
Bluetooth (Overview)Instrument Panel Center Molding Replacement (Without U58)
Instrument Panel Center Molding Replacement
Callout
Component Name
1
Instrument Panel Center Molding Assembly
Procedure
Use a flat bladed plastic trim tool in the shown locations, then
rotate the trim tool 90 ...
Roof Rear Header Panel Replacement (5HB)
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Disable the SIR system. Refer to SIR Disabling and Enabling.
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove all ...
Service Prior to Assembly
The importance of cleanliness during assembly cannot be overstated. Dirt or debris
will cause engine damage. An automobile engine is a combination of many machined,
honed, polished and lapped surfaces with minor tolerances. When any internal engine
parts are serviced, care and cleanliness are ...