Chevrolet Sonic Owner's Manual: Power Door Locks
Select and the following may display:
- Auto Door Unlock
- Unlocked Door Anti Lock Out
- Delayed Door Lock
Auto Door Unlock
Select to set which of the doors will automatically unlock when the vehicle is shifted into P (Park).
Select All Doors, Driver Door, or Off.
Unlocked Door Anti Lock Out
When on, this feature will keep the driver door from locking when the door is open. If Off is selected, the Delayed Door Lock menu will be available and the door will lock as programmed through this menu.
Select On or Off.
Delayed Door Lock
When on, this feature will delay the locking of the doors until five seconds
after the last door is closed. Three chimes will signal that delayed locking is
in use. Pressing either 
or
on the RKE transmitter twice will override
the delayed locking feature and immediately lock all of the doors. Select On or
Off.
Lighting
Select and the following may display:
Exit Lighting
Vehicle Locator Lights
Exit Lighting
Select to set how long the exterior lamps stay on when leaving the vehicle and
it is dark outside.
...
Lock, Unlock Settings
Select and the following may display:
Remote Unlock Light Feedback
Remote Lock Light & Horn Feedback
Remote Door Unlock
Remote Unlock Light Feedback When on, the exterior lamps will fla ...
Other materials:
Rear Side Door Replacement
Rear Side Door Replacement
Callout
Component Name
Warning: Refer to SIR Warning.
Preliminary Procedures
Mark the location of the hinge before removing the bolts with a
grease pencil.
Remove the rear door ...
Front Floor Console Bracket Replacement
Front Floor Console Bracket Replacement
Callout
Component Name
Preliminary Procedure
Remove the left front floor console extension panel. Refer to Front Floor
Console Extension Replacement - Left Side.
1
...
Main Shaft Assemble (Gen 2)
Special Tools
3-0207944 Main Shaft Tapered Bearing Insert Tool
For equivalent regional tools, refer to Special Tools.
Install the 4th gear bearing assembly (1).
in!i.l.i-if
Note: The 3rd gear blocking ring lugs must be aligned with the
3rd/4th gear synchronizer ass ...
0.0054