Oil Pump Replacement
Oil Pressure Relief Valve ReplacementImmobilizer System Component Programming
This procedure will learn the immobilizer function. If the battery voltage is
low, charge the battery before proceeding with the learn. If the body control module
(BCM) or engine control module (ECM) have been replaced, they must be programmed
before performing this learn procedure.
Dependin ...
Rear Compartment Lid Lock Cylinder Coding
The rear compartment lid lock cylinder uses 7 of the 7 cut positions. The tumbler
positions are staggered from side to side, 4 on one side and 3 on the other, are
not self-retaining, and are not snap in.
Note: All lock cylinders for side milled keys have right and left
tum ...
Intake Manifold Installation (1.6L LDE)
Clean the sealing surfaces.
Insert the NEW gasket.
Caution: Refer to Fastener Caution.
Install the intake manifold (2) and the 7 intake manifold bolts (1) and
tighten to 20 Y (15 lb ft).
Install the intake manifold supp ...