|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Quarter Inner Trim Finish Panel Assembly Procedure
Use a trim tool or equivalent to aid in removal. Note: After installation of the quarter inner trim panel, ensure the rear seat belt is not trapped under the trim panel. Pull up on the belt to verify full movement of the belt. |
Luggage Shade Replacement (Hatchback)
Quarter Outer Panel Pressure Relief Valve ReplacementThrust Washer and Bearing Cleaning and Inspection
Warning: Wear safety glasses to avoid injury when using compressed
air or any cleaning solvent. Bodily injury may occur if fumes are inhaled
or if skin is exposed to chemicals.
Caution: Do not allow the bearings to spin. Turn them slowly by
hand. Spinning the beari ...
Windshield Wiper Motor Replacement
Windshield Wiper Motor Replacement
Callout
Component Name
Preliminary Procedure
Remove the wiper system module. Refer to Windshield Wiper System Module
Replacement
1
Windshield Wiper Motor Brack ...
Rear Brake Cylinder Overhaul
Disassembly Procedure
Warning: Refer to Brake Dust Warning.
Warning: Refer to Brake Fluid Irritant Warning.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the rear brake cylinder. Refer to Rear Brake Cylinder Replacement. ...