|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement |
|
|
1 |
Quarter Outer Panel Pressure Relief Valve Assembly |
Quarter Inner Trim Finish Panel Replacement (Hatchback)
Rear Compartment Lid Inner Panel Trim Replacement (Sedan)Power Steering Control Module Programming and Setup
The following service procedures require either a programming or a setup event
performed for a complete repair.
Power Steering Control Module Replacement
If the steering column power steering control module needs to be is replaced,
the power steering control module needs to be progra ...
Drive Belt Replacement
Special Tools
EN-48488 Holding Wrench
EN-955 Locking Pin
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the right front wheelhouse liner extension. Refer to Front Wheelhouse
Liner Inner Front Extension Replacement.
Install the engine s ...
Control Valve Body Cover Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove the front bumper fascia opening lower cover.
Refer to Front Bumper ...