|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement. |
|
|
1 |
Radiator Grille Bumper Screw (Qty:?€‰6) Caution: Refer to Fastener Caution. |
|
2 |
Radiator Grille Bumper Procedure
Pull gently on each side of the radiator grille bumper to disengage from the front bumper fascia. |
Liftgate Weatherstrip Replacement
Rear Compartment Lid AdjustmentBrake Rotor/Drum Balance Inspection
Support the vehicle drive axle on a suitable hoist. Refer to Lifting and
Jacking the Vehicle.
Remove the tire and wheel assemblies from the drive axle. Refer to Tire
and Wheel Removal and Installation.
Warning: Refer to Work Stall Test Warning.
Reinstall the wheel nuts in ...
Crankshaft Position System Variation Learn
Note: The crankshaft position sensor system variation learn procedure
is required when the following service procedures have been performed, regardless
of whether DTC P0315 is set:
Engine replacement
Engine control module (ECM) replacement
Crankshaft damper replacement
...
Park Brake and P (Park) Mechanism Check
Warning: When you are doing this check, the vehicle could begin to
move. You or others could be injured and property could be damaged. Make sure
there is room in front of the vehicle in case it begins to roll. Be ready to
apply the regular brake at once should the vehicle begin to move. ...