Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the sterring wheel inflatable restraint module. Refer to Airbag Steering Wheel Module Replacement. |
|
1 |
Steering Wheel Lower Cover |
2 |
Steering Wheel Lower Cover Fastener (Qty: 2) |
3 |
Radio and Telephone Control Switch Assembly Procedure
Disconnect the electrical connector. |
Adhesive Installation of Windshields
Warning: Refer to Glass and Sheet Metal Handling Warning.
Use a urethane adhesive systems which meet GM Specification GM?€‰3651G.
Remove all mounds or loose pieces of urethane adhesive from the pinchweld
area.
If the original window is being reused, remove all but approxi ...
Multi-Axis Acceleration Sensor Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the Multi-axis Acceleration Sensor or Inertia
Sensor Module (IMU) is not properly configured with the correct calibration
software, the Electronic Brake Control Module will ...
Engine Flywheel Removal
Special Tools
EN-652 Flywheel Holder
For equivalent regional tools, refer to Special Tools.
Install EN-652 holder (1) to hold the engine flywheel (2).
Remove and DISCARD the 6 engine flywheel bolts (2).
Remove the engine flywheel (1). ...