|
Callout |
Component Name |
|---|---|
|
1 |
Radio Antenna Procedure
Rotate the mast counterclockwise in order to release the mast from the antenna base. |
Radio Antenna Base Replacement
Wireless Communication Interface Antenna ReplacementInstrument Panel Accessory Upper Trim Plate Replacement
Instrument Panel Accessory Upper Trim Plate Replacement
Callout
Component Name
Preliminary Procedure
Remove the instrument panel center molding. Refer to Instrument Panel
Center Molding Replacement.
1
...
Roof Front Header Panel Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Note: The roof front header panel is made of Ultra High Strength
Steel and should be replaced only at factory joints. Repairing or sectioning
of this part is not recomme ...
Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should
be performed before replacing the bushing, shaft, and in some cases, the component
which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces
before inspecting for damage.
Any of the followin ...