Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the front side door trim. Refer to Front Side Door Trim Replacement. |
|
1 |
Radio Front Side Door Speaker Bolt Caution: Refer to Fastener Caution. |
2 |
Radio Front Side Door Speaker Procedure
Disconnect the electrical connector. |
Cylinder Head Removal
Loosen the 12 cylinder head bolts in the sequence as shown. Use the following
procedure:
Loosen the cylinder head bolts 90 degrees.
Loosen the cylinder head bolts 180 degrees.
Note: Do not damage the guide sleeves (4) and (5).
R ...
Engine Mount Bracket Installation
Install the engine mount bracket (2).
Caution: Refer to Fastener Caution.
Install the 3 engine mount bracket bolts and tighten to 60 Y (45 lb ft) + 45?E0°.
...
Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T40/45/50)
Drive and Driven Sprocket, Drive Link, and Park Pawl Installation
Callout
Component Name
1
Front Differential Carrier Baffle
2
Front Differential Carrier Baffle Bolt M6 x 16& ...