Chevrolet Sonic Owner's Manual: Radio with Touchscreen
The infotainment system can play music or movies by connecting an auxiliary device to the USB port, if equipped.
USB Support
USB Supported Devices
- USB Flash Drives
- Portable USB Hard Drives
- 2G-5G iPod nano®
- 1G-3G iPod touch®
- 120GB/160GB iPod classic®
- 3G/3GS/4/4S iPhone®
Not all iPods and USB drives are compatible with the USB port.
Make sure the iPod has the latest firmware from Apple® for proper operation. iPod firmware can be updated using the latest iTunes® application. See www.apple.com/ itunes.
For help with identifying your iPod, go to www.apple.com/support.
The USB port can play both lower and upper case.mp3,.wma,.ogg, and.wav files stored on a USB storage device.
USB Supported File and Folder Structure
The Infotainment system supports:
- Up to 2,500 folders.
- Up to 10 folders in depth.
- Up to 2,500 music files.
- Up to 2,500 photo files.
- Up to 250 movie files.
- ID3 Tag (versions 1.0/1.1/2.2/ 2.3/2.4).
- FAT16.
- FAT32.
- exFAT.
Connecting and Controlling a USB Drive
The infotainment system can only play back.mp3 and.wma files from a USB drive.
Only the first 2,500 songs are recognized on the device.
When a device is not supported, the message “No supported da ...
Connecting a USB Storage Device or iPod/iPhone
To connect a USB storage device, connect the device to the USB port.
To connect an iPod/iPhone, connect one end of the device’s cable to the iPod/iPhone
and the other end to the USB port.
The iP ...
Other materials:
Hood Rear Seal Replacement
Hood Rear Seal Replacement
Callout
Component Name
1
Hood Rear Seal
Procedure
Clean the area where the seal will be mounted. Use a suitable solvent
with a mixture of 50?€‰percent isopropyl alcohol and 50?â ...
Oil Pan Removal
Remove the 16 oil pan bolts (1).
Caution: Pry the oil pan carefully in order to prevent damage
to the transaxle case or the oil pan sealing surfaces.
Place a suitable prying tool to the area shown (1) and carefully pry the
oil pan loose.
R ...
Camshaft Removal
Note: Note removal sequence 1?E.
Remove the 4 camshaft bearing cap bolts.
Note: Release the bearing support by striking it gently with a
plastic hammer.
Remove the first camshaft bearing cap (1).
Loosen the 8 exhaust camshaft bear ...
0.0046