Chevrolet Sonic Repair Manual: Range Selector Lever Cable Replacement
- Removal Procedure
-
- Set the park brake and chock the wheels.
- Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift lever pin.
- Press the locking tabs inward in order to release the transmission range selector lever cable (2) from the cable bracket.
- Remove the console. Refer to Front Floor Console Replacement.
- Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin.
- Release the transmission range selector lever cable retainer (1) and remove the transmission range selector cable from the transmission control lever base.
- Move the floor carpet in order to gain access to the gear shift cable grommet (2).
- Remove the grommet fasteners (1) and the transmission range selector lever cable grommet from the cowl panel.
- Remove the transmission range selector lever cable from the vehicle.
- Installation Procedure
-
- Install the transmission range selector lever cable to the vehicle.
- Install the transmission range selector lever cable grommet to the cowl panel.
- Install the grommet fasteners (1) and tighten to
9 Y (80 lb in)
.
- Install the transmission range selector lever cable to the transmission control lever base. Insure the cable retainer (1) is fully secured to the transmission control lever base.
- Connect the transmission range selector lever cable terminal (2) to the shift lever pin.
- Install the console. Refer to Front Floor Console Replacement.
- Install the transmission range selector lever cable (2) to the cable bracket.
- Connect the transmission range selector lever cable terminal (1) to the transmission manual shift lever pin.
- Adjust the automatic transmission range selector lever cable. Refer to Range Selector Lever Cable Adjustment.
Caution:
Refer to Fastener Caution.
Range Selector Lever Cable Bracket Replacement
Removal Procedure
Set the park brake and chock the wheels.
Disconnect the range selector cable end (1) from the
range selector lever.
Disconnect the range selector ...
Torque Converter
...
Other materials:
Plastic Collar Quick Connect Fitting Service
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning.
Note: There are several types of Plastic Collar Fuel and Evaporative
Emission Quick Connect Fittings used on this vehicle.
Bartholomew?€‰(1)
Q Release?€‰(2)
...
Tire Rotation
In order to equalize wear, rotate the tires at the specified intervals. Also,
rotate the tire and wheel assembly whenever you notice uneven tire wear.
Radial tires tend to wear faster in the shoulder area, particularly in front
positions, due to design. Radial tires in non-drive locations may ...
Control Solenoid Valve and Transmission Control Module Assembly Replacement
Removal Procedure
Remove the transmission control valve body cover.
Refer to Control Valve Body Cover Replacement.
Disconnect the output speed sensor electrical connector (2).
Disconnect the shift position switch electrical connector (3).
Disconn ...
0.0084