|
Callout |
Component Name |
|---|---|
|
Warning: Refer to Eye Protection Warning. Preliminary Procedure
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement. |
|
|
1 |
Rear Bumper Fascia Outer Guide Rivet (Qty:?€‰7) Special Tools
BO-594-A Hand Rivet Tongs For equivalent regional tools, refer to Special Tools. |
|
2 |
Rear Bumper Fascia Outer Guide |
Rear Bumper Fascia Outer Guide Replacement (Hatchback)
Rear Bumper Fascia Replacement (Hatchback)Airbag System Check
The airbag system does not need regularly scheduled maintenance or replacement.
Make sure the airbag readiness light is working. See Airbag Readiness Light.
Caution
If an airbag covering is damaged, opened, or broken, the airbag may not work
properly. Do not open or break the airbag coverings. ...
Piston, Connecting Rod, and Bearing Installation
Special Tools
EN-470-B Angular Torque Wrench
For equivalent regional tools, refer to Special Tools.
Adjust the piston ring joints as follows:
Upper compression ring (1).
Lower compression ring (4).
Oil rings (2) or (3).
Oil ring spacer (5). ...
Engine Oil Cooler Assemble
Caution: Refer to Fastener Caution.
Install the engine oil filter cap (1) along with a NEW seal ring (2) and
a NEW oil filter element (3) and tighten to 25 Y (18 lb ft).
Install the engine oil pressure indicator switch (5) and ...