|
Callout |
Component Name |
|---|---|
|
Warning: Refer to Hood Hold-Open Device Warning. Preliminary Procedure
Open and support the rear compartment lid. Special Tools
BO-125 Torque Rod Lifter For equivalent regional tools, refer to Special Tools. |
|
|
1 |
Rear Compartment Lid Hinge Torque Rod?€“ Right Side Note: Only use the special tool to remove and install the rear compartment lid hinge torque rod. |
|
2 |
Rear Compartment Lid Hinge Torque Rod?€“ Left Side Note: Only use the special tool to remove and install the rear compartment lid hinge torque rod. |
Rear Compartment Lid Adjustment
Rear Compartment Lid Rear Hinge ReplacementTire Inspection
We recommend that the tires, including the spare tire, if the vehicle has one,
be inspected for signs of wear or damage at least once a month.
Replace the tire if:
The indicators at three or more places around the tire can be seen.
There is cord or fabric showing through the tire's rubb ...
Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a
Punctured Tire
When using the tire sealant and compressor kit during cold temperatures, warm
the kit in a heated environment for five minutes. This will help to inflate the
tire faster.
If a tire goes flat, avoid further tire and wheel damage by driving slowly to
a level place. Turn on the hazard warning fl ...
Evaporator Air Temperature Sensor Replacement (LHD)
Evaporator Air Temperature Sensor Replacement
Callout
Component Name
1
Evaporator Air Refrigerant Temperature Sensor
Procedures
Disconnect the refrigerant temperature sensor
electrical connector.
Twist a ...