Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Rear Compartment Lid Inner Panel Trim Replacement (Sedan)

Chevrolet Sonic Repair Manual / Body / Body Interior / Trim Panels/Welts / Rear Compartment Lid Inner Panel Trim Replacement (Sedan)



Rear Compartment Lid Inner Panel Trim Replacement

Callout

Component Name

Preliminary Procedures

  1. Remove the rear compartment lid outer bumpers.
  2. Remove the latch cover.

1

Rear Compartment Lid Inner Panel Trim Retainer (Qty:?€‰13)

Procedure

Use a trim removal tool to aid in the removal of the rear compartment trim panel.

2

Rear Compartment Lid Inner Panel Trim

Quarter Outer Panel Pressure Relief Valve Replacement
Quarter Outer Panel Pressure Relief Valve Replacement Callout Component Name Preliminary Procedure Remove the rear bumper fasci ...

Rear Compartment Side Trim Replacement - Left Side (Sedan)
Rear Compartment Side Trim Replacement - Left Side Callout Component Name Preliminary Procedures Remove the rear compartment floor ...

Other materials:

Washing the Vehicle
To preserve the vehicle's finish, wash it often and out of direct sunlight. Caution Do not use petroleum-based, acidic, or abrasive cleaning agents as they can damage the vehicle's paint, metal, or plastic parts. If damage occurs, it would not be covered by the vehicle warranty. Approv ...

Immobilizer System Component Programming
This procedure will learn the immobilizer function. If the battery voltage is low, charge the battery before proceeding with the learn. If the body control module (BCM) or engine control module (ECM) have been replaced, they must be programmed before performing this learn procedure. Dependin ...

Brake Rotor Thickness Variation Measurement
Warning: Refer to Brake Dust Warning. Note: Any disc brake rotor that exhibits thickness variation exceeding the maximum acceptable level must be refinished or replaced. Thickness variation exceeding the maximum acceptable level can cause brake pulsation. If the inboard fricti ...

© 2014-2026 Copyright www.csmans.com
 
0.0096