Callout |
Component Name |
---|---|
1 |
Rear Side Door Lock Cylinder Opening Cover Screw Access Plug Tip: Use a flat-bladed tool to remove the cover. |
2 |
Rear Side Door Lock Cylinder Clamp Screw Caution: Refer to Fastener Caution. Procedure
Do Not remove the cylinder screw completely from the housing. unscrew the screw to a hard stop, remove the cylinder. Tighten
5?€‰Y (44?€‰lb?€‰in) |
3 |
Rear Side Door Lock Cylinder Procedure
Remove the lock cylinder cover. Refer to Rear Side Door Lock Cylinder Opening Cover Replacement. |
Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays
For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth
to wipe surfaces. Before wiping the surface with the microfiber cloth, use a soft
bristle brush to remove dirt that could scratch the surface. Then use the microfiber
cloth by gently rubbing to clean. Never use w ...
Turbocharger Assemble
Caution: Refer to Fastener Caution.
Install the NEW quick fitting connector (2) and a NEW seal ring (1) to the
turbocharger and tighten to 20 Y (15 lb ft).
Inspect the turbocharger coolant pipes for ridges and damage.
Install the tur ...
Timing Belt Adjustment
Special Tools
EN-652 Flywheel Holder
EN-6333 Locking Pin
EN-6340 Locking Tool
EN-6628-A Locking Tool
EN-45059 Torque Angle Sensor Kit
For equivalent regional tool, refer to Special Tools.
Removal Procedure
Remove the timing belt upper front cover. Refer to Timing Bel ...