Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the rear license plate lamp housing. Refer to Rear License Plate Lamp Replacement. |
|
1 |
License Plate Lamp Socket |
2 |
License Plate Lamp Bulb Tip: Pull the bulb straight out of the lamp socket. |
Hood Hold-Open Rod Replacement
Hood Hold-Open Rod Replacement
Callout
Component Name
1
Hood Hold-Open Rod
Warning: When a hood hold open device is being removed or
installed, provide alternate support to avoid the possibility of damage
...
Instrument Panel Center Molding Replacement (Without U58)
Instrument Panel Center Molding Replacement
Callout
Component Name
1
Instrument Panel Center Molding Assembly
Procedure
Use a flat bladed plastic trim tool in the shown locations, then
rotate the trim tool 90 ...
Tires and Wheels Description and Operation (Tire Identification)
Identification
Accessory and warranty replacement must use TPC spec tires.
An outboard orientation stripe is added to the tread surface, with an
offset toward the outboard tire face.
All GM approved tires (Production, Service and Accessory) have a TPC
(Tire Performance C ...