Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation. |
|
1 |
Rear Seat Belt Buckle Fastener (Qty:?€‰2) Caution: Refer to Fastener Caution.
45?€‰Y (33?€‰lb?€‰ft) |
2 |
Rear Seat Belt Buckle Assembly (Qty:?€‰2) |
Door Lock and Ignition Lock Folding and Non-Folding Key Cutting
High Security keys are available from the service parts system.
Obtain the key code from the security card or from the GM Dealer World, Parts,
Key Code Look Up system.
If you have the key code and access to a Triax-E., BD Laser or other code key
cutting machine from the GM Dealer Equipment C ...
Tread Wear Indicators Description
The original equipment tires have tread wear indicators that show when you should
replace the tires.
The location of these indicators are at 60 degree intervals around the outer
diameter of the tire. The indicators appear as a 6 mm (0.25 in) wide band when the
tire trea ...
Air Conditioning System Seal Replacement
Removal Procedure
Disassemble the A/C refrigerant components. Refer to the appropriate
repair procedure.
Note: Cap or tape the open A/C refrigerant components immediately
to prevent system contamination.
Cap or tape the A/C refrigerant components.
...