Callout |
Component Name |
---|---|
Preliminary Procedures
Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation. |
|
1 |
Rear Seat Center Shoulder Belt Buckle Fastener Caution: Refer to Fastener Caution.
45?€‰Y?€‰(33?€‰lb?€‰ft) |
2 |
Rear Seat Center Shoulder Belt |
Body Waterleak Repair
Warning: If the vehicle interior is exposed to moisture and becomes
soaked up to the level of the sensing and diagnostic module (SDM), the SDM and
SDM harness connector must be replaced. The SDM could be activated when powered,
which could cause airbag deployment and result in person ...
Radiator Cleaning
Warning: NEVER spray water on a hot heat exchanger. The resulting
steam could cause personal injury.
Caution: The heat exchanger fins are necessary for good heat transfer.
Do not brush the fins. This may cause damage to the fins, reducing heat transfer.
Note: Blow compressed ...
Cylinder Head Installation
Special Tools
EN-45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to Special Tools.
Clean the sealing surfaces.
Inspect for plane surface.
Cylinder block, cylinder head
Straight-edge, feeler gauge
Install the cylinder head gasket.
Install the cylinder head. ...