|
Callout |
Component Name |
|---|---|
|
1 |
Rear Side Door Lock Cylinder Opening Cover Procedure
Tip: Use a small flat-bladed tool to release the lock cylinder bezel retainers location on both sides. |
Rear Compartment Lid Lock Cylinder Coding
StorageKey with Integrated Transmitter Programming
Keys can be programming in various ways using the procedures outlined below.
Using the Replacing Keys procedures will first erase all the known keys from the
vehicle. Any existing keys and any new keys will then be programmed. This procedure
should be used any time a key is required to be unle ...
Body Control Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the control module is not properly configured
with the correct calibration software, the control module will not control
all of the vehicle features properly.
Ensure th ...
Intake Camshaft Replacement
Removal Procedure
Remove the camshaft intake and exhaust sprocket. Refer to Camshaft Intake
and Exhaust Sprocket Replacement.
Remove the camshaft bearing cap bolts in sequence shown. Ensure to remove
the bolts one turn at a time until there is no spring tension p ...