|
Callout |
Component Name |
|---|---|
|
1 |
Rear Side Door Lock Cylinder Opening Cover Procedure
Tip: Use a small flat-bladed tool to release the lock cylinder bezel retainers location on both sides. |
Rear Side Door Check Link Replacement
Rear Side Door Opening Floor Carpet Retainer ReplacementTire and Wheel Assembly Runout Measurement - Off Vehicle
Raise and support the vehicle.
Mark the location of the wheels to the wheel studs and mark the specific
vehicle position on each tire and wheel – LF, LR, RF, RR.
Remove the tire and wheel assemblies from the vehicle.
Closely inspect each tire for proper and even bead seating.
If an ...
Scrub Radius Description
Ideally, the scrub radius is as small as possible. Normally, the SAI angle and
the centerline of the tire and the wheel intersect below the road surface, causing
a positive scrub radius. With struts, the SAI angle is much larger than the long
arm/short arm type of suspension. This allows the S ...
Manual Shift Shaft Seal Installation
Manual Shift Shaft Seal Installation
Callout
Component Name
1
Manual Shift Shaft Seal
Special Tool
DT-49101 Seal Installer
For equivalent regional tools, refer to Special
Tools.
...