Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Rear Side Door Weatherstrip Replacement - Body Side

Chevrolet Sonic Repair Manual / Body / Body Exterior / Panels / Rear Side Door Weatherstrip Replacement - Body Side



Rear Side Door Weatherstrip Replacement - Body Side

Callout

Component Name

Preliminary Procedures

  1. Remove the upper center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement.
  2. Remove the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement
  3. Remove the carpet retainer. Refer to Rear Side Door Opening Floor Carpet Retainer Replacement.

1

Rear Side Door Weatherstrip Body Side

Procedure

  1. Starting in the center bottom of the weatherstrip, pull the weatherstrip upward and away from the pinch-weld flange.
  2. Start in the center bottom of the pinch-weld flange.
  3. Ensure that the weatherstrip and retainers are fully seated on the flange before installing the front carpet retainer.
  4. Inspect the door for proper operation.
Rear Side Door Upper Hinge and Lower Hinge Replacement
Rear Side Door Upper Hinge and Lower Hinge Replacement Callout Component Name 1 Rear Side Door Upper Hinge to Body Bolts ...

Rear Side Door Weatherstrip Replacement - Door Side
Rear Side Door Weatherstrip Replacement - Door Side Callout Component Name 1 Rear Side Door Weatherstrip Procedure ...

Other materials:

Air Conditioning Compressor and Condenser Hose Replacement (LDE/LWE)
Removal Procedure Recover the refrigerant. Refer to Refrigerant Recovery and Recharging. Disconnect the A/C refrigerant pressure sensor electrical connector. Remove air conditioning compressor and condenser hose nut (1). Remove air conditioning compressor and ...

Battery Negative Cable Replacement
Battery Negative Cable Replacement Callout Component Name Preliminary Procedures Disconnect the battery current sensor connector. Remove the battery tray. Refer to Battery Tray Replacement. 1 Bo ...

Engine Front Cover and Oil Pump Disassemble
Engine Front Cover Disassemble Remove the intake camshaft position sensor bolt (1). Remove the intake camshaft position sensor (2) and the seal ring (3). Remove the exhaust camshaft position sensor bolt (6). Remove the exhaust camshaft posi ...

В© 2014-2024 Copyright www.csmans.com
 
0.009