Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Rear Side Door Window Regulator Motor Replacement

Chevrolet Sonic Repair Manual / Body / Glass & Windows / Window Control / Window Regulator / Rear Side Door Window Regulator Motor Replacement



Rear Side Door Window Regulator Motor Replacement

Callout

Component Name

Warning:

Refer to Glass and Sheet Metal Handling Warning.

Preliminary Procedure

Remove the rear side door window regulator. Refer to Rear Side Door Window Regulator Replacement.

1

Rear Side Door Window Regulator Motor Screw (Qty:?€‰3).

Caution:

Refer to Fastener Caution.

Procedure

  1. Remove the rear side door water deflector.
  2. Remove the rear side door window from the guide. Do Not remove the window from the vehicle, raise the window to the fully up position, tape in place.
  3. Disconnect the electrical connector from the window regulator motor.
Tighten


5?€‰Y?€‰(44?€‰lb?€‰in)

2

Rear Side Door Window Regulator Motor

Procedure

Inspect the door window for proper operation before installing the door trim panel.

Rear Side Door Window Regulator Handle Replacement
Rear Side Door Window Regulator Handle Replacement Callout Component Name 1 Rear Side Door Window Regulator Handle Clip ...

Rear Side Door Window Regulator Replacement (Hatchback)
Rear Side Door Window Regulator Replacement Callout Component Name Warning: Refer to Glass and Sheet Metal Handling Warning. ...

Other materials:

Headlining Trim Panel Replacement (Sedan with Sunroof)
Headlining Trim Panel Replacement Callout Component Name Warning: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged ...

Tire Pressure Indicator Sensor Learn
Special Tools EL-46079 Tire Pressure Monitor Diagnostic Tool EL-50448 Tire Pressure Monitor Sensor Activation Tool For equivalent regional tools, refer to Special Tools. Learn Mode Description The tire pressure monitor system uses the instrument cluster, body control module (B ...

Main Shaft Disassemble (Gen 2)
Special Tools 69604356 Gear Pullers For equivalent regional tools, refer to Special Tools. Remove the 1st gear thrust washer (1) and the 1st gear (2) using 69604356 pullersand a hydraulic press. ii Remove the following components: 1st gear bearing asse ...

© 2014-2025 Copyright www.csmans.com
 
0.0091