Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Rear Side Door Window Regulator Motor Replacement

Chevrolet Sonic Repair Manual / Body / Doors and Enclosures / Doors / Rear Side Door Window Regulator Motor Replacement



Rear Side Door Window Regulator Motor Replacement

Callout

Component Name

Warning:

Refer to Glass and Sheet Metal Handling Warning.

Preliminary Procedure

Remove the rear side door window regulator. Refer to Rear Side Door Window Regulator Replacement.

1

Rear Side Door Window Regulator Motor Screw (Qty:?€‰3).

Caution:

Refer to Fastener Caution.

Procedure

  1. Remove the rear side door water deflector.
  2. Remove the rear side door window from the guide. Do Not remove the window from the vehicle, raise the window to the fully up position, tape in place.
  3. Disconnect the electrical connector from the window regulator motor.
Tighten


5?€‰Y?€‰(44?€‰lb?€‰in)

2

Rear Side Door Window Regulator Motor

Procedure

Inspect the door window for proper operation before installing the door trim panel.

Rear Side Door Window Regulator Handle Replacement
Rear Side Door Window Regulator Handle Replacement Callout Component Name 1 Rear Side Door Window Regulator Handle Clip ...

Rear Side Door Window Regulator Replacement (Hatchback)
Rear Side Door Window Regulator Replacement Callout Component Name Warning: Refer to Glass and Sheet Metal Handling Warning. ...

Other materials:

Repairs and Inspections Required After a Collision
Accident With or Without Air Bag Deployment ?€“ Component Inspections Warning: Proper operation of the Supplemental Inflatable Restraint (SIR) sensing system requires that any repairs to the vehicle structure return the vehicle structure to the original production configur ...

Air Conditioning Clutch Assembly Replacement (LDE/LUW/LWE)
Air Conditioning Clutch Assembly Replacement Callout Component Name Preliminary Procedure Remove the air conditioning compressor. Refer to Air Conditioning Compressor Replacement. 1 Air Conditio ...

Front Floor Console Cover Replacement (Manual Transmission)
Removal Procedure Use a flat bladed plastic trim tool in order to release the retainers securing the console cover (1) to the console assembly. Reach under the console cover assembly (1) and release the retainer tabs securing the transmission s ...

© 2014-2025 Copyright www.csmans.com
 
0.0075