Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Rear Side Door Window Replacement (Hatchback)

Chevrolet Sonic Repair Manual / Body / Glass & Windows / General / Rear Side Door Window Replacement (Hatchback)



Rear Side Door Window Replacement

Callout

Component Name

Warning:

Refer to Glass and Sheet Metal Handling Warning.

Preliminary Procedures

  1. Remove the rear side door trim panel. Refer to Rear Side Door Trim Replacement.
  2. Remove the rear side door rear guide. Refer to Rear Side Door Window Rear Guide Replacement.
  3. Remove the rear side window outer sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement.

1

Rear Side Door Window Guide Nut (Qty:?€‰2)

Caution:

Refer to Fastener Caution.

Procedure

  1. Use masking tape, tape off the outer door frame and applique to prevent scratching.
  2. Remove the rear side door water deflector.
  3. Loosen nuts on the guide so that the window can be removed.
  4. In order to remove the window out of the frame, carefully grasp and tilt the window as you guide the window up and forward.
Tighten


11?€‰Y?€‰(97?€‰lb?€‰in)

2

Rear Side Door Window

Procedure

  1. Align the window guide with the access holes in the inner door panel.
  2. Install the window to the guide.
  3. Do not operate the regulator motor without supporting the window. Ensure that the window remains in the guide when operating the regulator motor.
  4. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guide. Tighten the nuts to the window guide.
  5. Inspect the window for proper operation before installing the trim panel.
Rear Side Door Window Rear Guide Replacement
Rear Side Door Window Rear Guide Replacement Callout Component Name Preliminary Procedure Remove the rear side door trim panel. ...

Rear Side Door Window Replacement (Sedan)
Rear Side Door Window Replacement Callout Component Name Warning: Refer to Glass and Sheet Metal Handling Warning. ...

Other materials:

SIR Identification Views
The SIR Identification Views shown below illustrate the approximate location of all SIR components available for the vehicle. This will assist in determining the appropriate SIR Disabling and Enabling for a given service procedure, refer to SIR Disabling and Enabling. Supplemental Inf ...

Tires and Wheels Description and Operation
There are two types of tire and wheel balancing: static and dynamic. Static balance is the equal distribution of weight around the wheel. Assemblies that are statically unbalanced cause a bouncing action called wheel tramp. This condition may eventually cause uneven tire wear. ...

Instrument Panel Outer Air Outlet Duct Replacement
Instrument Panel Outer Air Outlet Duct Replacement Callout Component Name Preliminary Procedures Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Reposition any wiring or hoses to gain ...

© 2014-2025 Copyright www.csmans.com
 
0.0087