|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
|
1 |
Rear Wheelhouse Panel Liner Screw (Qty:?€‰5) Caution: Refer to Fastener Caution.
3?€‰Y (27?€‰lb?€‰in) |
|
2 |
Rear Wheelhouse Panel Liner Nut (Qty:?€‰4) Tighten
2?€‰Y (18?€‰lb?€‰in) |
|
3 |
Rear Wheelhouse Panel Liner Push-In Retainer |
|
4 |
Rear Wheelhouse Panel Liner |
Rear Wheelhouse Liner Replacement (Hatchback - Left)
Rear Wheelhouse Liner Replacement (Sedan - Left)Halogen Bulb Warning
Warning: Halogen bulbs contain gas under pressure. Handling a bulb
improperly could cause it to shatter into flying glass fragments. To help avoid
personal injury:
Turn off the lamp switch and allow the bulb to cool before changing
the bulb.
Leave the lamp switch OFF until th ...
Tire Dismounting and Mounting (Match Mounting)
Match mounting is required on any wheel/tire assembly not within RFV specification.
Important: If a wheel/tire assembly is not within the RFV specification
after match mounting, the tire must be returned to the tire manufacturer.
All wheel weights should be removed prior ...
Jump Starting
For more information about the vehicle battery, see Battery.
If the battery has run down, try to use another vehicle and some jumper cables
to start your vehicle. Be sure to use the following steps to do it safely.
Warning: Batteries can hurt you. They can be dangerous because:
The ...