|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Using a small flat-bladed tool, release the locking tabs and lift the end of the wiper arm nut cover in order to access and remove the rear wiper arm nut. |
|
|
1 |
Rear Window Wiper Arm Nut Caution: Refer to Fastener Caution.
10?€‰Y (89?€‰lb?€‰in) |
|
2 |
Rear Window Wiper Arm Tip: Align and hold the rear window wiper arm blade to the edge of the blackout on the rear liftgate window while tightening. |
Wiper Chatter Repair
Windshield Wiper Arm ReplacementDolly Towing from the Front
The vehicle can be towed from the front using a dolly. To tow the vehicle using
a dolly, follow these steps:
1. Attach the dolly to the tow vehicle following the dolly manufacturer's instructions.
2. Drive the front wheels onto the dolly.
3. Put an automatic transmission in P (Park) or a ...
Engine Oil Cooler Housing Installation
Clean the engine oil cooler housing to thermostat housing sealing surfaces.
Install 2 NEW gaskets.
h.\.\,.\\..,v:..//
Install the engine oil cooler inlet pipe (3).
Install the engine oil cooler housing (1) and the 5 engine oil cooler bolts (2)
and t ...
Camshaft Timing Chain Removal
Special Tools
EN-952 Fixing Pin
EN-953-A Fixing Tool
EN-955-10 Fixing Pin from EN-955 Kit
For equivalent regional tools, refer to Special Tools.
The engine should be adjusted to TDC.
The crankshaft should be fixed with EN-952 fixing pin.
The camshaft should be fixed with EN-953 ...