|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the rear window wiper motor. Refer to Rear Window Wiper Motor Replacement. |
|
|
1 |
Rear Window Wiper Motor Grommet Tip: Apply some lubricant to the outside of the grommet upon installation to aid in installation through the liftgate glass opening. |
Wiper Blade Element Cleaning
Rear Window Wiper Motor Replacement (Hatchback)Oil Pump Cleaning and Inspection
Remove the external rotor with the internal rotor.
Visually inspect the components.
Install the external and the internal rotors.
Inspect the axial clearance of the rotors in respect to the control unit
housing upper edge.
Specifications
Permissible measurement is 0.02?E.058 ...
Air Cleaner Inlet Duct Replacement
Removal Procedure
Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner
Replacement.
Remove the upper intake air duct plastic fastener (1).
Pull the lower portion of the intake air duct outward to release the
duct from the rub ...
Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate Installation
(6T30)
Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate
Installation
Callout
Component Name
1
Low and Reverse and 1??? Clutch Housing
Note: The longer legs face the bottom of the case and the
...