The remote control door lock receiver only functions as an antenna, receiving the signals sent by the keyless entry transmitter and forwarding them to the body control module (BCM). The keyless entry software is contained wholly within the BCM.
This ECU does not require SPS programming or any setup procedures.
License Plate Lamp
Lamp Assembly
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the left end of the lamp assembly toward the right.
2. Turn the lamp assembly down to remove it.
3. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly
( ...
Front Air Deflector Replacement
Front Air Deflector Replacement
Callout
Component Name
Preliminary Procedure
Remove front bumper fascia. Refer to Front Bumper Fascia Replacement
Remove the headlamp. Refer to Headlamp Replacement.
1
...
Shoulder Belt Replacement - Rear (Sedan)
Shoulder Belt Replacement - Rear
Callout
Component Name
Preliminary Procedure
Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement.
1
Rear Seat Shoulder Belt Anchor Plat ...