|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the windshield outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement. |
|
|
1 |
Remote Control Door Lock Receiver Procedure
|
Remote Control Door Lock Receiver Programming and Setup
Front Side Door Lock Cylinder Coding (Free Wheeling)Lead/Pull Description
At a constant highway speed on a typical straight road, lead/pull is the amount
of effort required at the steering wheel to maintain the vehicle's straight path.
Important: Vehicles will tend to lead/pull in the direction of the
road slope as part of normal operation.
Lead/pull is ...
Inspection/Maintenance (I/M) System DTC Table (LWE)
Inspection/Maintenance (I/M) System DTC Table
System
DTCs Required to Set System Status to YES
If an inspection/maintenance system status indicator did NOT update to
YES during the Inspection/Maintenance System Check,
review ea ...
Synchronizers Disassemble
1st/2nd Gear Synchronizer
iv
Note: When servicing the synchronizers, retain them in the
same order that they are removed. Keep the synchronizer components together
and mark them to identify correct location.
Remove the 1st/2nd gear synchronizer hub ...