Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Replacing LATCH System Parts After a Crash

Chevrolet Sonic Repair Manual / Body / Restraints / Restraints Control / Replacing LATCH System Parts After a Crash

Warning:

A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the system inspected and any necessary replacements made as soon as possible.

If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed.

New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash.

Replacing Airbag System Parts after a Crash
Warning: A crash can damage the airbag systems in the vehicle. A damaged airbag system may not work properly and may not protect you and your passenger(s) in a crash, resulting in serious inj ...

Replacing Safety Belt System Parts after a Crash
Warning: A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a cr ...

Other materials:

Rear Seats
The vehicle's rear seats have adjustable head restraints in the outboard seating positions. The height of the head restraint can be adjusted. Pull the head restraint up to raise it. Try to move the head restraint to make sure that it is locked in place. To lower the head restraint, press ...

Air Conditioning Compressor and Condenser Hose Replacement (LDE/LWE)
Removal Procedure Recover the refrigerant. Refer to Refrigerant Recovery and Recharging. Disconnect the A/C refrigerant pressure sensor electrical connector. Remove air conditioning compressor and condenser hose nut (1). Remove air conditioning compressor and ...

Drive Range, Fifth Gear Default (Gen 2)
If the transmission encounters an electrical component malfunction, the transmission will default to Fourth gear. All solenoids will default to their normal state. If the torque converter clutch is applied, it will release. The transmission will remain in Drive Range?Fourth Gear Default until ...

В© 2014-2026 Copyright www.csmans.com
 
0.0063