Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Replacing Safety Belt System Parts after a Crash

Chevrolet Sonic Repair Manual / Body / Restraints / Restraints Control / Replacing Safety Belt System Parts after a Crash

Warning:

A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.

After a minor crash, replacement of safety belts may not be necessary. But the safety belt assemblies that were used during any crash may have been stressed or damaged. See your dealer to have the safety belt assemblies inspected or replaced.

New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.

Have the safety belt pretensioners, if equipped, checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light.

Replacing LATCH System Parts After a Crash
Warning: A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help ...

SIR Disabling and Enabling
SIR component location affects how a vehicle should be serviced. There are parts of the SIR system installed in various locations around a vehicle. To find the location of the SIR components refer ...

Other materials:

Liftgate (Hatchback)
Warning Exhaust gases can enter the vehicle if it is driven with the liftgate, hatch/trunk open, or with any objects that pass through the seal between the body and the hatch/trunk or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsci ...

Transmission Fluid Pump Assemble (6T40/45/50)
Table 1: Fluid Pump w/Valve Trains Assemble Table 2: Torque Converter Fluid Seal and Fluid Filter Assembly Assemble Fluid Pump w/Valve Trains Assemble Fluid Pump w/Valve Trains Assemble Callout Comp ...

Gears Cleaning and Inspection (Gen 2)
Gears Warning: Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals. Clean the following gears in a suitable solvent and air dry all the p ...

В© 2014-2024 Copyright www.csmans.com
 
0.0064