Heated Seats Description and Operation
InformationFog Lamps (RS)
To replace the front fog lamp bulb:
Locate the fog lamp located under the front fascia.
Remove the cap from the back of the fog lamp assembly.
Disconnect the electrical connector from the fog lamp bulb assembly.
Remove the bulb by turning it counterclockwise and pulling it straight out ...
Brake Rotor Assembled Lateral Runout Correction - On Vehicle Lathe
Special Tools
CH-45101-100 Conical Brake Rotor Washers
For equivalent regional tools, refer to Special Tools.
Warning: Refer to Brake Dust Warning.
Note:
Brake rotor thickness variation MUST be checked before checking
for assembled lateral runout (LRO). Thickness ...
Front Floor Console Cover Replacement (Manual Transmission)
Removal Procedure
Use a flat bladed plastic trim tool in order to release
the retainers securing the console cover (1) to the console assembly.
Reach under the console cover assembly (1) and release
the retainer tabs securing the transmission s ...