|
Callout |
Component Name |
|---|---|
|
1 |
Hose Retainer (QTY:2) Note: Squeeze the retainer on opposite sides to release. |
|
2 |
Secondary Air Injection Pipe. Procedure
Disconnect the pipe from the secondary air injection pump and the air cleaner. |
Secondary Air Injection Check Valve Replacement
Secondary Air Injection Pump InstallationEmblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution.
The part and vehicle surface should be 21?°C (70?°F) prior to installation.
The vehicle should remain inside in a temperature range of 21?°C (70?°F) for
1 hour after assembly to allow the adhesive to develop sufficient bo ...
Spare Tire Kit Installation
Installation Instructions Part Number
95280943
Procedure
...
Main Shaft Disassemble (Gen 2)
Special Tools
69604356 Gear Pullers
For equivalent regional tools, refer to Special Tools.
Remove the 1st gear thrust washer (1) and the 1st gear (2)
using 69604356 pullersand a hydraulic press.
ii
Remove the following components:
1st gear bearing asse ...