|
Callout |
Component Name |
|---|---|
|
1 |
Hose Retainer (QTY:2) Note: Squeeze the retainer on opposite sides to release. |
|
2 |
Secondary Air Injection Pipe. Procedure
Disconnect the pipe from the secondary air injection pump and the air cleaner. |
Air Cleaner Outlet Duct Replacement
Air Cleaner Element ReplacementBody Panel Paint Protector Replacement (VGC)
The paint protective film and vehicle surface temperature should be 13?€“32?°C
(55?€“90?°F) for best results.
Automatic car washes should be avoided for at least 24?€‰hours after the
paint protective film application.
Wipe the vehicle surface with isopropyl alcohol or fl ...
Tire-to-Wheel Match-Mounting (Vectoring)
Note: After remounting a tire to a wheel or after replacing a tire
and/or a wheel, remeasure the tire and wheel assembly runout in order to verify
that the amount of runout has been reduced and brought to within tolerances.
Ensure that the tire and wheel assembly is properly balanced ...
Manifold Absolute Pressure Sensor Replacement
.-
Manifold Absolute Pressure Sensor Replacement
Callout
Component Name
1
Manifold Absolute Pressure Sensor Fastener
Caution: Refer to Fastener Caution
Tighten
6 Y (54 lb in)
...