|
Callout |
Component Name |
|---|---|
|
1 |
Hose Retainer (QTY:2) Note: Squeeze the retainer on opposite sides to release. |
|
2 |
Secondary Air Injection Pipe. Procedure
Disconnect the pipe from the secondary air injection pump and the air cleaner. |
Secondary Air Injection Check Valve Replacement
Secondary Air Injection Pump Pipe ReplacementHVAC System Control Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the control module is not properly configured
with the correct calibration software, the control module will not control
all of the vehicle features properly.
Ensure th ...
Electrical Power Management Description and Operation
Electrical Power Management
The electrical power management is used to monitor and control the charging
system and alert the driver of possible problems within the charging system.
The electrical power management system makes the most efficient use of the generator
output, improves ...
Clutch System Description and Operation
Clutch Spin Down Time
Inspect the clutch spin down time as follows:
Apply the parking brake and block the vehicle wheels.
Shift the manual transmission into NEUTRAL.
Start the engine. Run the engine at idle speed.
Engage the clutch.
Disengage the clutch. Wait 9 seconds.
...