Chevrolet Sonic Repair Manual: Secondary Air Injection Pump Pipe Removal
- Disconnect the secondary air injection pump pipe (3) from the secondary air injection check valve. Refer to Plastic Collar Quick Connect Fitting Service.
Secondary Air Injection Pump Pipe Installation
Connect the secondary air injection pump pipe (3) to the secondary air injection
check valve. Refer to Plastic Collar Quick Connect Fitting Service.
...
Secondary Air Injection Pump Pipe Replacement
Secondary Air Injection Pump Pipe Replacement
Callout
Component Name
1
Hose Retainer (QTY:2)
Note: Squeeze the r ...
Other materials:
Communication Interface Module Replacement
Communication Interface Module Replacement
Callout
Component Name
Preliminary Procedure
Remove the instrument panel lower compartment.
Refer to Instrument Panel Lower Compartment
Replacement.
Remove the instrument pa ...
Heater Inlet Hose Replacement (LDE, LUW)
Special Tools
BO-38185 Hose Clamp Pliers
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling.
Disengage the heater inlet hose quick connect clip (1) at the heater
...
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection
Removal Procedure
Note: Perform the following procedure when removing the retaining
rings and cooler lines from the quick connect fittings located on the
radiator and/or the transmission.
Pull the plastic cap back from the quick connect fitting
and dow ...
0.0058