Callout |
Component Name |
---|---|
1 |
Secondary Air Injection Pump Inlet Pipe Note: Squeeze the retainer on opposite sides to release. |
2 |
Secondary Air Injection Pump Outlet Pipe Note: Squeeze the retainer on opposite sides to release. |
3 |
Secondary Air Injection Pump Electrical Connector |
4 |
Secondary Air Injection Pump Bolt Caution: Refer to Fastener Caution.
22 Y (16 lb ft) |
5 |
Secondary Air Injection Pump Nut Tighten
22 Y (16 lb ft) |
6 |
Secondary Air Injection Pump |
Front Wheel Drive Shaft Seal Replacement - Left Side
Front Wheel Drive Shaft Seal Replacement - Left Side
Callout
Component Name
Preliminary Procedures
Raise and support the vehicle. Refer to Lifting and Jacking the
Vehicle.
Remove the left wheel drive shaft. Refer to Front ...
Cooling System Description and Operation
Cooling System
The cooling system maintains the engine operating temperature at the efficient
level under any speed and operating condition. When the engine is cold, the
cooling system cools the engine slowly or not at all. The slow cooling of the
engine allows the engine to warm u ...
Transmission Mount Bracket Replacement - Rear
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove the front suspension skid plate, if equipped.
Refer to Drivetrain and Front Suspension Frame Skid
Plate Replacement.
Using a suitable jack stand, support the rear of the ...