Chevrolet Sonic Owner's Manual: Service Publications Ordering Information
Service Manuals
Service Manuals have the diagnosis and repair information on the engines, transmission, axle, suspension, brakes, electrical, steering, body, etc.
Service Bulletins
Service Bulletins give additional technical service information needed to knowledgeably service General Motors cars and trucks. Each bulletin contains instructions to assist in the diagnosis and service of the vehicle.
Owner Information
Owner publications are written specifically for owners and intended to provide basic operational information about the vehicle. The Owner Manual includes the Maintenance Schedule for all models.
In-Portfolio: Includes a Portfolio, Owner Manual, and Warranty Manual.
RETAIL SELL PRICE: $35.00 (U.S.) plus handling and shipping fees.
Without Portfolio: Owner Manual only.
RETAIL SELL PRICE: $25.00 (U.S.) plus handling and shipping fees.
Current and Past Models
Technical Service Bulletins and Manuals are available for current and past model GM vehicles.
ORDER TOLL FREE: 1-800-551-4123 Monday – Friday 8:00 AM – 6:00 PM Eastern Time
For Credit Card Orders Only (VISA-MasterCard-Discover), see Helm, Inc. at: www.helminc.com.
Or write to:
Helm, Incorporated Attention: Customer Service
47911 Halyard Drive
Plymouth, MI 48170
Prices are subject to change without notice and without incurring obligation. Allow ample time for delivery.
All listed prices are quoted in U.S. funds. Make checks payable in U.S. funds.
Collision Damage Repair
If the vehicle is involved in a collision and it is damaged, have the damage
repaired by a qualified technician using the proper equipment and quality replacement
parts. Poorly performed collision ...
Other materials:
Engine Oil Cooler Housing Removal
Remove the 2 engine oil cooler pipe bolts (1).
Remove the oil cooler pipe (2).
h.\.\,.\\..,v:..//
Remove the 5 engine oil cooler housing bolts (2).
Remove the engine oil cooler housing (1).
Remove the engine oil cooler inlet pi ...
Drive Belt Installation
Special Tools
EN-955 Locking Pins
EN-48488 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Note: Ensure that the drive belt tensioner is held with EN-955?E
locking pin.
Install the drive belt.
Move the drive belt tensioner clockwise until EN- ...
Control Valve Body Assembly Disassemble (Gen 1)
Control Valve Body Assembly Disassemble
Callout
Component Name
1
Control Solenoid Valve Support
2
Control Valve Body Bolt M5 x 40.5 (Qty: 1)
3
...
0.006