Warning:
When performing service on or around the SIR components or the SIR wiring, follow the procedures listed below in order to temporarily disable the SIR system. Failure to follow the procedures could result in the following:
Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles,
latch plates, retractors, and anchorages are all working properly. Look for any
other loose or damaged safety belt system parts that might keep a safety belt system
from doing its job. See your dealer to have it re ...
Body Side Upper Front Applique Replacement
Body Side Upper Front Applique Replacement
Callout
Component Name
Caution: Refer to Exterior Trim Emblem Removal Caution.
Preliminary Procedure
Open either the left front or right front door in order to access ...
Brake Pedal Travel Measurement and Inspection
Special Tools
CH-28662 Brake Pedal Effort Gauge
For equivalent regional tools, refer to Special Tools.
With the ignition OFF and the brakes cool, apply the brakes 3–5 times, or
until the brake pedal becomes firm, in order to deplete the brake booster power
reserve.
In ...